Product category: Deadlocks
Dimensions: Cylinder Backset: 31/32”, 1-1/8”, or 1-1/2”
Bolt: Zinc alloy with Delrin face for smooth, quiet action, measures 5/8” x 5/8” with 7/16” throw. Handing easily reversible. Bolt can be held fully retracted to allow door to be free swinging (see catalog page for illustration).
Strike: Satin stainless steel trimplate with steel mounting plate and dust box. Flat strike furnished. Also available for pairs of doors in radius shape, or flat with square corners for ANSI hollow metal jambs. Flat strikes also available with longer lip. MS+1890 Deadlock/Latch cannot be used with electric strikes. 5/8” x 1-3/8” with 13/16” throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws, while hook shape repels pry bar attempts to “spread” the door from its jamb or lift it off its track.
Standard Package: Individually boxed with strike and machine screws for mounting. Cylinders available separately. Shipping weight: 2 lbs.
Compatible Products: Trim strikes available separately, including 4505 armored strike.
Case: Steel with corrosion-resistant plating, measures 1” x 7-3/8” x depth. Depth varies by backset (see table on catalog page).
Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.