Official PayPal Seal
Images may not represent actual product and finish
Images may not represent actual product and finish

CRL 316 3/16" Spearpoint Glass Drill

Your Price: $13.58
Retail Price:$16.74
Your Savings:$3.16(19%)

C.R. Laurence 316

Part Number

:
CRL_316
CRL 316 3/16" Spearpoint Glass Drill

This CRL Spearpoint Glass Drill meets your demand for a low priced, reliable glass drill. The diamond-lapped, spade-shaped tip will drill many smooth holes in glass, vitrolite, china, ceramic, tile, etc. You can use this drill with hand held, low RPM drilling machines. Capable of drilling holes very fast, this drill is easy-to-use, and will give you extended service life. You can conveniently use the CRL Spearpoint Drill in models such as CRL2, SDM4, and 41 Glass Drilling Machines, but it works best in a regular power drill. When working with these drills, be sure to keep the drill cool by using a lubricant, such as our Cat. No. PGT1 Turpentine. NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.

  • For Use with Low RPM Drilling Machines
  • Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
  • Works with CRL2, SDM4 or Regular Power Drills
  • Capable of drilling holes very fast, this drill is easy-to-use, and will give you extended service life. You can conveniently use the CRL Spearpoint Drill in models such as CRL2, SDM4, and 41 Glass Drilling Machines, but it works best in a regular power drill. When working with these drills, be sure to keep the drill cool by using a lubricant, such as our Cat. No. PGT1 Turpentine. NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.

Attributes

Ship via: Can Ship UPS

Catalog Number: 316

Drill Diameter: 3/16" (4.8 mm)

Minimum Order: 1 Each

Recommended RPM: 400 - 800

Shank Diameter: 7/64" (2.8 mm)

TOP