Official PayPal Seal
Eric Morris 11-3535-613 Pair Of 3-1/2" x 3-1/2" Hinges, Dark Oxidized Satin Bronze, Oil Rubbed
Product Shown in Brass Finish

Eric Morris 11-3535-613 Pair Of 3-1/2" x 3-1/2" Hinges, Dark Oxidized Satin Bronze, Oil Rubbed

Your Price: $42.03
Part Number

:ERI_113535613
Eric Morris 11-3535-613 Pair Of 3-1/2" x 3-1/2" Hinges, Dark Oxidized Satin Bronze, Oil Rubbed
 
Overwiev:
  • Classic Design with Button Finial
  • Solid Extruded Brass
  • Lift Off Hinge
  • Hand Polished
  • Plain Bearing
  • Standard Weight
  • All Hinges may be Enhanced with Decorative Solid Brass Finials
Two Knuckle - Lift Off - Hinge Sizes:
  • L 3.0" W 2.5" Gauge 0.093" Screw 10 x 1.00"
  • L 3.0" W 3.0" Gauge 0.093" Screw 10 x 1.00"
  • L 3.5" W 3.5" Gauge 0.123" Screw 10 x 1.00"
  • L 4.0" W 4.0" Gauge 0.130" Screw 12 x 1.25"
  • L 4.5" W 4.5" Gauge 0.134" Screw 12 x 1.25"
Two Knuckle - Lift Off - Solid Extruded Brass Hinge - Plain Bearing - Standard Weight:
  • Two knuckle Lift Off Hinges are specified and priced as eaches.
  • All hinges have template screw hole locations for use with either wood or hollow metal doors and frames.
  • All pins are machined from high grade 304 Stainless Steel material and are affixed to the bottom leaf.
  • All finials are threaded into the barrel of the hinge.
  • All hinges are furnished standard with button finials and solid brass phillips head, type "A" tapping screws.
  • #12 Machine Screws for 13-4040/2 and 13-4545/2 available upon request, at additional cost.
  • All two knuckle hinges are handed. Be sure to specify hand of hinge when ordering.
  • All finials are interchangeable with all full mortise hinge sizes in order to ease stocking.
 
Features:
  • Hinge Body: Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed.
  • Finish: Hinges are individually hand polished assuring an even finish with no unpolished areas. Eric Morris & Company extruded hinges are available in over 30 standard finishes. Custom finishing is available. Please refer to the Price List.
  • Pins: Pins are machined from 304 Stainless Steel for high durability and resistance to rust. The exposed end is rounded to facilitate re-assembly, while the other end is permanently affixed to the bottom leaf.
  • Finials: Finials are threaded into both ends of the barrel and fit all full mortise hinge sizes. Finials can be purchased separately in sets of four. Decorative finials are individually bagged.
  • Fasteners: All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either six per bag or eight per bag to facilitate sales of single hinges. #12 Machine Screws available upon request.
  • Packing: Two hinges per box with screws and button finials. Each hinge is poly bagged to prevent scratching. Hinges are packed 20 boxes per master carton.
  • Number of Hinges: For doors up to 89 inches, use three hinges. For each additional 30 inches or fraction thereof, use one additional hinge.

Recently Viewed Items