Official PayPal Seal
Images may not represent actual product and finish
Images may not represent actual product and finish

Hafele 003.15.042 Titebond

Your Price: $42.30
Retail Price:$52.87
Your Savings:$10.57(20%)
Part Number

:HAF_00315042
DISCOUNTED VOLUME PRICING
Quantity
Price
  • 5 - 9
  • $42.09
  • 10 - 49
  • $41.88
  • 50 - 99
  • $41.67
  • 100 - 499
  • $41.45
  • 500+
  • $41.24

Grade:

Piece

Finish:

2020-03-16

Origin:

Spare Parts > Hafele,Hafele
Hafele 003.15.042 Titebond

  • BOND STRENGTH ASTM D-905 (On Hard Maple) Substrates Strength psi % wood failure Melamine/Melamine Lap Shears 329 100 Melamine/Particle Board 329 100
  • APPLICATION GUIDELINES Application temperature: Above 40°F. Open assembly time: 5 minutes (70°/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods) Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16” in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN
  • Bonds melamine and vinyl coated products to porous materials
  • Dries clear
  • Low odor–nonflammable
  • Thicker formulation–fewer runs and drips


Attributes

Capacity: (1 gal.) 3.79 l

Resources

Related Items

Recently Viewed Items