Ives offers various accessories to ensure a door is hung, protected and secured. Coordinators work with a flush bolt to secure a door and ensure a pair of doors close in proper order for latching to occur. With many bar coordinators, filler bars, mounting brackets, gravity coordinators and carry bars, Ives has coordinator needs covered.

Specifications:

• The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other
• All COR units function easily; The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.
• All COR units do not function correctly with swing clear hinges. (consult factory when used with 3⁄4" offset pivots)
• All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure
• All COR units are compatible with flush bolts
• For openings where doors are unequal size:
• The coordinator length should equal the active door width plus approximately 1⁄2 the inactive door width
• The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops
• The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines
• Material Substrate: Aluminum 6000 Series
• Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware
• Security pin screws
• Replacement mounting package
• Replacement rub plate package
• Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line
• Security pin screws
• Special prep cut-outs: Required for certain vertical exit device applications
• Certifications: Meets ANSI/BHMA A156.3 Type 21A. UL Listed for installation on labeled frame

Sizes:

Finishes:

• 628/US28 - Satin Aluminum, Anodized
• 711/315AN - Black Anodized
• 713 - Satin Chrome, Anodized