McKinney T4A3384 Half Mortise Hinge 5", Antique Bronze Oiled
Half Mortise Bearing Heavy Weight Hinges are for greater frequency and weight than Plain Bearing or standard hinges.
5 knuckle half mortise hinges from McKinney fit the channel iron jambs and attach with machine screws. The door leaf is mortised into the edge of the door, giving this style the half mortise descriptive name.
McKinney offers the half mortise hinge in 4 1/2" and 5” lengths in a standard weight. This is an appropriate choice for average frequency and medium weight doors that see more traffic than a Plain Bearing hinge could accommodate.
With an NRP screw holding the pin in place, these are fully reversible hinges, in both the standard and heavy weight half mortise styles. The heavy weight 5 knuckle half mortise hinge offer the same sizes as the standard weight but adds a 6” length as an additional option.
The swing clear half mortise hinge style allows the maximum clearance available when the door is open. It is recommended for high traffic doorways and heavy wood or metal doors. Like the other half mortise hinge styles it is reversible.
T4A3384/T4A3784 Catalog Page
Antique Bronze Oiled
Since 1865, McKinney Products Company, formerly McKinney Manufacturing, has been designing and manufacturing architectural hardware and specialty hardware for the commercial market. As a leader in the industry, McKinney Products Company was proud to join the ASSA ABLOY Group in 1996, which provided expanded resources and development opportunities.
McKinney hinges goes above and beyond expected service by offering electronic security applications to provide remote monitoring and access via electrified hinges, including a patent on the Power over Ethernet (PoE) hinge, which provides an extra layer of electronic security by adding the ability to pass data via an embedded Ethernet system. McKinney hinges aren’t only smart, they are tough. The StormPro line of hinges is even tough enough to withstand a tornado and come in a variety of metals, sizes, weights, and finish.
McKinney Products Company is sure to have what you need, for your specific application - even hard to find decorative architectural hardware with special tips and finishes. If you don’t see what you are looking for, custom manufacturing is offered at the Berlin, CT plant.
McKinney Products Company cares not only for the customer but also the environment by offering sustainable and/or renewable materials and utilizing recycled content.
Recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where heavy traffic is experienced
The hinges may be used on channel iron jambs
The jamb leaf is applied to the surface of the jamb with machine screws. The door leaf is mortised into the edge of the door
The pin is held in place by an NRP set screw, which allows the hinge to be reversible
For Beveled Edge, where doors are beveled in hinge side, specify T4A4384 or T4A4784