McKinney TA391 Non-Ferrous Bearing Hinge 5" x 4-1/2", Satin Stainless Steel
Anchor hinge sets are used on doors where high traffic, abuse, or other door hardware place an unusual strain on the door, jamb, and hinges.
McKinney full mortise anchor sets are used in places where high traffic, abuse or a heavy door puts an unusual strain on the door, the jamb and the hinges. These high traffic door hinges have an anchor plate for the door, the jamb or both.
McKinney has 4 styles of anchor hinges all in the 3 knuckle configuration. Keep in mind that the anchor hinge is the top hinge only. Other hinges on the door are standard, or electrified, barrel hinges. Anchor hinges are available in either stainless steel or steel.
Concealed close anchor hinges are available with the anchor hinge configured for either the door or the jamb. These hinges are designed for use with concealed door holders or door closers. All sets include one anchor hinge and two 5”X 4 1/2" full mortise hinges.
Surface applied door closers allow the use of an anchor hinge with an anchor plate for both the jamb and the door. These hinges are available with either a standard door leg or an extended 4” door leg for additional support.
All anchor hinges in all styles insert the pin from the bottom of the barrel and hold it in place with an NRP set screw. They are all also available for doors that are doors that are beveled in the hinge side.
TA391/TA791 Catalog Page
Satin Stainless Steel
Since 1865, McKinney Products Company, formerly McKinney Manufacturing, has been designing and manufacturing architectural hardware and specialty hardware for the commercial market. As a leader in the industry, McKinney Products Company was proud to join the ASSA ABLOY Group in 1996, which provided expanded resources and development opportunities.
McKinney hinges goes above and beyond expected service by offering electronic security applications to provide remote monitoring and access via electrified hinges, including a patent on the Power over Ethernet (PoE) hinge, which provides an extra layer of electronic security by adding the ability to pass data via an embedded Ethernet system. McKinney hinges aren’t only smart, they are tough. The StormPro line of hinges is even tough enough to withstand a tornado and come in a variety of metals, sizes, weights, and finish.
McKinney Products Company is sure to have what you need, for your specific application - even hard to find decorative architectural hardware with special tips and finishes. If you don’t see what you are looking for, custom manufacturing is offered at the Berlin, CT plant.
McKinney Products Company cares not only for the customer but also the environment by offering sustainable and/or renewable materials and utilizing recycled content.
Recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where heavy traffic is experienced
For use with concealed door holders or door closers
Set includes one anchor hinge and two 5" x 41/2" full mortise hinges
Sets require handing and are packed with all machine and all wood screws
The pin is inserted from the bottom of the barrel on the anchor hinge, and is held in place by an NRP set screw
Anchor plate for door header only, permits use of holders and closers concealed in the top of the jamb
For Beveled Edge, where doors are beveled in hinge side, specify TA5391 or TA5791