Pemko's standard duty anodized aluminum Full Mortise residential continuous heared hinge for 1-3/8" doors.
Designed mainly for new door and frame applications.
Applied to conceal both leaves.
Designed for doors 1-3/8" thick with a weight up to 90 lbs.
BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
Available in 79" and 83" lengths.
Fasteners are #12 x 1-1/2", Flat Head SMS.
Standard model (79"): 8 fasteners required for each leaf.
Standard model (83"): 10 fasteners required for each leaf.
Wood screws available on request (specify on order).
Standard duty hinge. 10" between bearing centers.
Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
All hinges meet criteria of UBC 7.2 for positive pressure.
Certain door and frame conditions may require an extra 1/32"-1/16" clearance.
PemkoHinge products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 79" and 83" = 7 bearings, door weight = 90 lbs.
Width: 5/16” (7.9 mm) (between frame edge and door edge).
Cap Width: 25/32” (19.8 mm).
Height: 1-1/4” (31.8 mm) (to flange/frame edge & door edge sides).
Height: 11/16” (17.5 mm) (to top cap/frame edge & door edge sides).