Pemko's standard duty anodized aluminum Half Surface Safety continuous geared hinges are designed mainly for retrofit work in child care and nursing facilities and are applied to the exposed surface of the frame rabbet. Also available in heavy duty models.
Designed for use with hollow metal frames, where the inset conforms to S.D.I. specifications for aligning doors and frames.
Allows for adjustments in order to properly align the edge of the door to the frame.
BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
Fasteners - Frame Portion - All fasteners are #12-24 x 7/16" FHUC, Type C, threadforming.
Standard model: 16 fasteners required for each leaf.
Wood screws available on request (specify on order).
Fasteners - Door Portion - a. Thru-bolt - 1/4-20 x 1-5/8". - Standard Duty Hinges - 4 required. - b. Shoulder Bolt - 1/4-20 x 1" PCH. - Standard Duty Hinges - 4 required. - c. Pan Head Self Drilling #12 x 3/4". - Standard Duty Hinges - 6 required.
Standard duty hinge. 6" between bearing centers.
Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
PemkoHinge products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 83" and 85" = 14 bearings, door weight = 280 lbs.; 95" = 16 bearings, door weight = 320 lbs.; 120" = 20 bearings, door weight = 400 lbs.
Width: 2” (50.8 mm) (between frame leaf and door leaf edge).
Cap Width: 25/32” (19.8 mm).
Height: 1-1/2” (38.1 mm) (frame edge side - leaf).