Rockwood AP1007 Arm Pull with Plate, Satin MicroShield

Rockwood AP1007 Arm Pull with Plate, Satin MicroShield

Featuring rounded corners on the backplate, the groove on the inside of the AP1007 pull comfortably accepts your arm to open the door.

This pull can be used with the opening at the bottom.

Part Number	Material	Base Plate	Pull	Projection	Clearance	Weight
AP1007	Stainless Steel	4" x 16" with Rounded Corners (additional plate sizes available)	3/4"	4"	2-25/32" at Center of Groove	4 lbs, 5.7 oz.

Fasteners

•  #8 x ¾" Oval Head Sheet Metal Screws
• 3/8-16 x 2-1/2" Flat Head Machine Screw
• 3/8-16 Finish Washer

WARNING! 

This application is intended to be a "hands-free" application using a forearm or wrist engagement to the pull in a normal swinging door load and operation with minimized touch. There can be damage and possible voiding of the warranty if mis-installed or the product is abused in instances of but not limited to:

• Product installation without proper adjustments to door stops to avoid impact to a wall.
• Abuse to the pull by means of excessive force, twist, or push beyond normal hands free pull operation
• Lack of thru bolt installation.

 

AP1007 32DMS; 4" x16" Plate; Pull Dia: 3/4", Projection 4"; Clearance 2-27/32"

Resources

• Catalog Section - Rockwood AP1007.32DMS
• Rockwood AP1007 Arm Pull with Plate Installation Instructions - French
• Rockwood AP1007 Arm Pull with Plate Installation Instructions
• Rockwood Hands-Free Brochure
• Rockwood AP1007 Arm Pull with Plate Cut Sheet