ABH 2100US28 Recessed Magnetic Door Holder Tri-Voltage, 12VDC, 24VAC/DC, 120VAC, 628/US28 Satin Aluminum

The newly designed 2000 Series Electro-magnetic Door Holders is now Tri-Voltage. Each model (except 2500) can be wired 12V DC, 24V AC/DC or 120V AC. Units can be used on fire/smoke barrier doors held open until released by a remote switching device. They can also be used to just hold a door open. The armature is thru-bolted to the door for security and can be provided with any projection required. When ordering indicate model, total projection, finish and door thickness if other than 1-3/4".

Features:

• For use on fire/smoke barrier doors hold open until released by a remote switching device. Can also be used to just hold door.
• Total projection - 2-5/8" 3-5/8" with one 1" extension
• Special Electrical Circuit field selectable Tri-Voltage - 12V DC, 24V AC/DC, 120V AC
• 30-45# holding power
• Easy wire installation with quick insert connector
• Stainless steel face plate available
• Available in US28, Sprayed Finishes and US32D
• Armature is thru-bolted for security and can be provided with any projection required.
• Armature extensions available for unlimited projections and/or 120° Swivel Extension
• Armature design will compensate for centerline misalignment up to 1/4" with double swivel and pivoting ball
• UL and ULC listed
• California State Fire Marshall Listed
• City of New York MEA Approved
• Low current design
• Meets ANSI/BHMA requirements 156.15

Finishes:

• 628/US28 - Satin Aluminum
• 630/US32D - Satin Stainless Steel
• 629/US32 - Bright Stainless Steel
• 689/S1 - Painted Aluminum
• 696/S2 - Painted Brass (to match US4)
• 691/S3 - Painted Bronze (to match US10)
• 693/S4 - Painted Black
• 690/S5 - Painted Dark Bronze (to match US10B)

• For use on fire/smoke barrier doors hold open until released by a remote switching device. Can also be used to just hold door.
• Total projection - 2-5/8" 3-5/8" with one 1" extension
• Special Electrical Circuit field selectable Tri-Voltage - 12V DC, 24V AC/DC, 120V AC
• 30-45# holding power
• Easy wire installation with quick insert connector
• Stainless steel face plate available
• Available in US28, Sprayed finishes and US32D
• Armature is thru-bolted for security and can be provided with any projection required.
• Armature extensions available for unlimited projections and/or 120° Swivel Extension
• Armature design will compensate for centerline misalignment up to 1/4" with double swivel and pivoting ball
• UL and ULC listed
• California State Fire Marshall Listed
• City of New York MEA Approved
• Low current design
• Meets ANSI/BHMA requirements 156.15

Features

• For use on fire/smoke barrier doors hold open until released by a remote switching device. Can also be used to just hold door.
• Total projection - 2-5/8" 3-5/8" with one 1" extension
• Special Electrical Circuit field selectable Tri-Voltage - 12V DC, 24V AC/DC, 120V AC
• 30-45# holding power
• Easy wire installation with quick insert connector
• Stainless steel face plate available
• Available in US28, Sprayed Finishes and US32D
• Armature is thru-bolted for security and can be provided with any projection required.
• Armature extensions available for unlimited projections and/or 120° Swivel Extension
• Armature design will compensate for centerline misalignment up to 1/4" with double swivel and pivoting ball
• UL and ULC listed
• California State Fire Marshall Listed
• City of New York MEA Approved
• Low current design
• Meets ANSI/BHMA requirements 156.15

Resources

• 2100
• 2300
• Cut Sheet
• Cut Sheet
• cross_reference