Altronix LINQ8PD Network Power Distribution Module, 8 Fused Outputs, Fire Alarm Interface

Altronix LINQ8PD Network Power Distribution Module offers robust power management with eight fused outputs, designed for seamless integration into your security systems. This innovative module allows for the monitoring, reporting, and control of one or two low voltage AC or supervised DC power supply/chargers over a network, ensuring that you stay ahead of potential issues. With diagnostics reported via Email and SNMP notifications, the LINQ8PD significantly reduces system downtime and minimizes unnecessary service calls, promoting efficiency. Each of the eight outputs is rated for 3 amps, with surge suppression to protect your devices. Both local and remote control options are available, allowing for flexible management of power output. The module also features comprehensive status monitoring, including power supply output voltage and load, individual output voltage and load, and critical system parameters such as FACP trigger and reset status, along with battery health. Advanced programming capabilities enable you to set voltage and load limits, configure trigger types, and customize input functions. Compatible with most currently installed multi-output power supply/chargers, the Altronix LINQ8PD is a versatile solution for access control and management in various applications. Optimize your security infrastructure with this reliable power distribution module.

Network Power Distribution Module Board Only, 8 Fused Outputs, Control, FAI Fire Alarm Interface, Monitor and Report in Individual Output Diagnostics, Reports Diagnostics Via Email Notifications

LINQ8PD network power distribution module facilitates monitoring, reporting and control of one (1) or two (2) low voltage AC or supervised DC power supply/chargers over the network. Reports diagnostics via Email/SNMP notifications greatly reducing system downtime and eliminating unnecessary service calls. LINQ8PD retrofits with most currently installed multi-output power supply/chargers.

Features:

• Input Power:
• Input1/Input2: 12VAC-28VAC @ 12.5 amp each or 12VDC/28VDC @ 12.5 amp each
• Note: Do connect AC and DC simultaneously to INP1 and INP2
• Outputs:
• Eight (8) fused or PTC protected outputs rated 3 amps
• Power output(s) can be locally or remotely controlled
• Surge Suppression
• Status Monitoring:
• Power Supply(ies) output voltage and load
• Voltage and load of each output
• FACP trigger and reset status
• Unit temperature (Celsius)
• Power Supply AC and Battery status
• Battery health
• Programming Features:
• Power Supply(ies) voltage and load limits (High/Low)
• FACP trigger type (wet or dry-N.O./N.C.)
• Input Function (FACP reset/tamper)
• Output Reset Trigger (N.O./N.C.)

Resources

• Cut Sheet