CRL FA1410 15" Window Channel Balance - Model 1410/14-1

Description

CRL FA1410 15" Window Channel Balance - Model 1410/14-1

C.R. Laurence FA1410 15" Window Channel Balance is a vital component for window systems, ensuring smooth operation and optimal performance. This balance measures 5/8" (16 mm) in depth, though it is commonly referred to as 1/2" (13 mm) in the trade, making it an excellent choice for various window configurations. Designed to accommodate a vent weight range of 4 to 6 pounds, the FA1410 is available in multiple lengths ranging from 13" to 42" (330 mm to 1.07 m), catering to a variety of sash weights. The FA Series requires nylon guides that can either be pre-attached at the factory or ordered separately for DIY installation. For those opting to attach the guides themselves, the handy Cat. No. H3740 Rivet Set Tool is available to ensure a secure fit. When ordering, it’s essential to measure the length of the metal channel only and refer to the stamped or laser-etched number on the back of the balance for precise matching. This channel balance is designed for reliability and ease of use, making it a preferred choice among building professionals and knowledgeable homeowners alike. With no shipping limitations, the FA1410 is ready to support your window system needs efficiently.

15" Window Channel Balance - 1410 or 14-1

Measures 5/8" (16 mm) Depth, but Referred to as 1/2" (13 mm) in the Trade
10, 20, 30, 40, and 50 Weight Range Balances in Lengths from 13" to 42" (330 mm to 1.07 m)

Each CRL FA Series 1/10 Weight Range Sash Balances requires one of several types of nylon guides to be riveted onto the top and bottom of the channel. Customers can either order channel balances with guides pre-attached at the factory, or can order guide kits, with rivets included, and mount the guides themselves. CRL also offers the handy Cat. No. H3740 Rivet Set Tool, which mushrooms the rivet, giving it a very strong set.

Ordering Tips for FA Series Sash Balances

Remove the existing Channel Balance from the window. Measure the length of the metal channel only. Do not include the Guides. This measurement should be at full inch increments. NOTE: There have been a few window manufacturers that have used special 1/2" (12.7 mm) increment channel lengths. These Channel Balances are not stocked, however they can be special ordered.

Always look for the stamped or laser etched number on the back of the Channel Balance. This number will either be four numbers or two numbers and a letter. For example: 2710 or 27-1.

Using the numbers on the back of the Channel Balance, refer to the chart. If you have a full 18" (457 mm) length channel, and the corresponding number on the back of the Channel Balance is 1710 or 17-1, the corresponding CRL Cat. No. is FA1710.

If you have a full 27" length channel, and the number on the back of the Channel Balance is 2610 or 26-1, the corresponding Cat. No. is FA2610. The chart also includes a vent weight range. This range indicates the amount of sash weight that a pair of Channel Balances will hold. This range does not account for any excessive weatherstrip friction.

NOTE: The weight range chart should be used for reference only, or if the stamped number is too difficult to read.

Special weight range Channel Balances are available by special order. The standard balance chart shows stocked weight ranges from FA1210 to FA4240. The 10, 20, 30, 40 and 50 represents the counter-balance weight designation. If your Channel Balance has a number 90 or 9, instead of the five weight ranges listed above (for example: 2790-26) this Channel Balance was made specifically to carry a 26-pound sash weight per pair of Balances. If your Channel Balance has a "DS" after the length, for example 27DS-34, this pair of Channel Balances was made specifically to carry a 34-pound sash weight. These special weight Channel Balances are sometimes designed specifically for upper or lower sashes only. This information will need to be provided at time of order.

Product Warning:

The first two numbers of the CRL Catalog Number do not represent the length of the channel.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Attributes

Channel Depth: 5/8

Channel Length: 15

Channel Width: 9/16

Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov

Guides Attached: No

Number Stamped on Channel: 1410 or 14-1

Shipping Limitations: None

Vent Weight Range: 4 To 6

Resources

Window Channel Sash Balance Weight Range Information