CRL PH42LA Satin Anodized 90 Left Hand Sidelite Patch with 1NT300 Insert

C.R. Laurence PH42LA Satin Anodized 90 Degree Left Hand Sidelite Patch With 1NT300 Insert is expertly designed to support transom installations from sidelite glass panels. This robust patch fitting works seamlessly with 2-9/16" (65 mm) pivot setback door patch fittings and is specifically engineered for 3/8" (10 mm) glass. The versatility of the PH42LA allows for both left and right-handed configurations, catering to a variety of installation needs. Included with the patch is the 1NT300 insert, which facilitates the mounting of a door using the compatible PH21A top door patch fitting. This insert can also be repositioned on the non-hinged side to accommodate double swing doors, enhancing usability. For one-way door functionality, the INT306 transom patch door stop insert can be employed. Glass fabrication is required for this product, necessitating three 3/4" (19 mm) diameter holes and one corner notch, with panels needing to be flat polished-no miters are required. The PH42LA comes complete with a template and instructions to ensure a straightforward installation process. Please note, this fitting is not suitable for laminated glass. With a satin anodized finish, this patch not only delivers functionality but also adds a touch of modern elegance to any design.

Satin Anodized 90 Degree Left Hand Sidelite Patch With 1NT300 Insert

• Works with 2-9/16" (65 mm) Pivot Setback Door Patch Fittings
• For 3/8" (10 mm) Glass Only
• Left and Right Handed

Resources

• PH42L Template.pdf
• Template gc-ph42l.pdf