HPC DP-7B Tool

Your Price:

$550.30

Retail Price:

$792.000

Your Savings:

$241.70 (31%)

Add to Cart

Brand: HPC

Part Number: HPC_DP7B

Availability: Special order - ships in 5-10 business days

Description

HPC DP-7B Tool

If the lock core has been pulled and use of the guard key has not opened the door, then it is time to apply the DP-7B Door Puller Set. Place the stepped Spacer Block onto the hook unit. The 3 different diametered steps of .345" (2.15cm), .562" (1.43cm) and .680" (1.73cm) make it adaptable to 3 different sizes of plug holes. Place the correct diameter step into the hole. Have the hook end set against the inside back wall of the door, then tighten the knurled nut to hold the hook in place. The flat surface on the outside of the hook unit should be in a level position.The long flat blade is then fitted onto the holding slot, along with the remainder of the Puller unit, as shown above. Position feet away from the centers of adjacent doors,to minimize the possibility of distortion. The knurled knob is then turned until the door is pulled out.

Nose Puller Set - All within a Steel Carrying Case (Above image shows the complete Door Puller Set in position and ready to pull out the safe deposit door.)

Features

Nose Puller Set - All within a Steel Carrying Case (Above image shows the complete Door Puller Set in position and ready to pull out the safe deposit door.)

Attributes

Alternate Codes: 105681, 501171, DP-7B, DP7B

Category: Locksmith Equipment, Tools

Commercial Residential: Commercial

Department: Locksmith Tools

Installation: Commercial

Pack Qty: 1

Picking Tools: Pullers

Series: HPC Tools

Subtype: Tool

Type: Set

Unit of Measure: Each

HPC DP-7B Tool

Description

Attributes

Resources