Morris 97302 Clear In-Line Insulated Connector for Accurate Termination

Morris 97302 Clear In-Line Insulated Connector ensures your electrical terminations are accurate every time. This innovative connector features clear insulation that allows for visual confirmation of proper conductor insertion, providing peace of mind during installation. Crafted from durable 6061-T6 aluminum, the CU9AL dual-rated design accommodates both copper and aluminum wire, making it a versatile choice for various applications. The single-piece clear molded insulation is enhanced with a rugged high-dielectric plastisol dipped coating, ensuring chemical and abrasion resistance. Pre-filled with an oxide inhibitor, it promotes long-lasting performance and reliability. Installation is made simple with easy re-entry for modifications, inspections, or troubleshooting, while removable plugs marked with wire sizes facilitate straightforward access. Designed for convenience, the Morris 97302 allows for wire entry from either end of the connector and eliminates time-consuming manual taping, significantly reducing installation time. Rated for 600 volts and capable of handling temperature ranges from –49°F to 194°F (–45° to 90°C), this connector is suitable for indoor use only. Compliance with ANSI C119.4 and cULus 486b standards ensures safety and quality. With dimensions of 3.46" in length, 1.62" in height, and 0.82" in width, it accommodates wire sizes ranging from 2-14.

With our Clear In-Line Insulated Connector, you'll see your termination is right every time

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Indoor Use Only
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• In-Line 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Insulated aluminum connector eliminates the need for time consuming manual taping, reducing installation time
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• Rated for use with 194°F(90°C) Cables
• One Wire Per Terminal
• Removable Plugs marked with wire size provide easy access for installation.
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• 600 Volt
• Wire entry from either end of clear connector
• Dimension Measurements = Inches
• Temperature range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet