Morris 97304 Clear In-Line Insulated Connector for Reliable Terminations

Morris 97304 Clear In-Line Insulated Connector ensures that your electrical terminations are accurate and reliable every time. Designed with clear insulation, this connector allows for visual confirmation that the conductor is properly inserted, which minimizes the risk of installation errors. The in-line connector is crafted from durable 6061-T6 aluminum and is dual rated for use with both copper and aluminum wire, accommodating a wide range of applications. Featuring a rugged single-piece clear molded insulation with a high-dielectric Plastisol dipped coating, this connector is resistant to chemicals and abrasions, ensuring longevity and performance in demanding environments. Pre-filled with an oxide inhibitor, it provides enhanced protection against corrosion. The easy re-entry design allows for straightforward changes, inspections, or troubleshooting as needed. With removable plugs marked with wire sizes, installation is made simple and efficient. This connector operates within a temperature range of -49°F to 194°F (-45° to 90°C) and supports wire entry from either end. Rated for 600 volts and ANSI C119.4 & cULus 486b listed, it is intended for indoor use only. The Morris 97304 connector significantly reduces installation time by eliminating the need for manual taping, helping to prevent costly power outages due to improper connections.

With our Clear In-Line Insulated Connector, you'll see your termination is right every time

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Indoor Use Only
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• In-Line 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Insulated aluminum connector eliminates the need for time consuming manual taping, reducing installation time
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• Rated for use with 194°F(90°C) Cables
• One Wire Per Terminal
• Removable Plugs marked with wire size provide easy access for installation.
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• 600 Volt
• Wire entry from either end of clear connector
• Dimension Measurements = Inches
• Temperature range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet