Marks Hardware 195FEU/26D-H2 EU 12V Clutched Lever Lockset, Marks C Keyway, Grade 1, Satin Chrome

Marks Hardware 195FEU/26D-H2 EU 12V Storeroom Clutched Lever Lockset is engineered for exceptional durability and security. This Grade 1 lockset features a robust construction with a cast stainless steel retractor, bronze roller bearings, and a 6-pin cylinder in the Marks "C" keyway, complemented by two nickel-silver keys. Designed to withstand a torque of 1800 inch-pounds-more than double the ANSI/BHMA test value-this lockset is built for high-traffic environments. The innovative clutch mechanism allows the outside lever to turn freely when locked, significantly reducing wear and preventing failure due to excessive torque. With life testing exceeding 6 million cycles, this lockset is proven to maintain its functionality over time. Installation is streamlined with only two thru-bolts required, ensuring secure and vibration-proof mounting. With a backset of 2-3/4 inches and compatibility with door thicknesses ranging from 1-5/8 to 1-7/8 inches, the 195FEU/26D-H2 fits a variety of applications. The satin chrome finish not only enhances aesthetics but also provides corrosion resistance. UL Listed and fire-rated for up to 120 minutes, this lockset is an ideal solution for institutional and commercial settings, ensuring safety and reliability when it matters most.

EU 12V Storeroom Clutched Lever Lockset, Marks C Keyway, 6 Pin, 2-3/4in Backset, ANSI Strike, Grade 1, 626/US26D Satin Chrome

The Grade 1 Survivor is supplied with 6 pin cylinders in Marks "C" keyway with 2 nickel-silver keys. The retractor is cast stainless steel with bronze roller bearings for ultra-high strength, smooth operation & long life. When locked, the Survivor’s clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with Rigid levers are prone to failure because of excessive torque.

• Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value
• Life tested over 6 million cycles; Fully operational after these tests
• Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting
• Only two thru-bolts for easy installation
• Breakaway handles (American & Crescent design) protect against excessive abuse

Features:

• Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional
• Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose
• Levers: Solid cast Zamac w/ 1/2" return
• Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts
• Strike: #1135, 4-7/8" ASA curved lip
• Door thickness: 1-5/8" to 1-7/8" (For 1-3/8" door use K1704 spacer.)
• Cylinder: Marks C keyway, 6 pin w/ 2 keys or IC Core housing
• Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier; 24V/DC, .21 Amps
• 12V/DC Optional, Contact factory for additional options
• Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset)
• Features "The Clutch"
• UL Listed, 3 hour fire rated

Functions:

• Passage
• Privacy
• Patio
• Communicating
• Entry
• Exit
• Classroom
• Storeroom
• Institution
• Vestibule
• Corridor
• Store Door
• Hospital/Privacy
• Service Station Lock
• Classroom Intruder
• Dummy Trim Outside
• Full Dummy Trim
• Communicating Passage
• Communicating Storeroom
• Communicating Classroom