Morris 97305 Clear In-Line Insulated Connector for Accurate Terminations

Morris 97305 Clear In-Line Insulated Connector ensures that your electrical terminations are accurate and reliable every time. Designed for both copper and aluminum wire, this dual-rated connector features a robust 6061-T6 aluminum construction, making it ideal for a variety of applications. The clear insulation allows for visual confirmation that the conductor is properly inserted, enhancing your confidence during installation. Its single-piece molded insulation is coated with a rugged high-dielectric plastisol, providing chemical and abrasion resistance, while the pre-filled oxide inhibitor ensures optimal performance. Easy re-entry makes adjustments, inspections, or troubleshooting straightforward, and removable plugs marked with wire sizes facilitate quick access for installation. With a wide temperature range of –49°F to 194°F (–45° to 90°C) and capable of handling up to 600 volts, this connector is designed for indoor use only. By eliminating the need for time-consuming manual taping, the insulated aluminum connector significantly reduces installation time and minimizes the risk of power outages due to improper connections. Compliant with ANSI C119.4 and cULus 486b standards, the Morris 97305 is a reliable choice for building professionals and knowledgeable homeowners alike.

With our Clear In-Line Insulated Connector, you'll see your termination is right every time

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Indoor Use Only
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• In-Line 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Insulated aluminum connector eliminates the need for time consuming manual taping, reducing installation time
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• Rated for use with 194°F(90°C) Cables
• One Wire Per Terminal
• Removable Plugs marked with wire size provide easy access for installation.
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• 600 Volt
• Wire entry from either end of clear connector
• Dimension Measurements = Inches
• Temperature range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet