Adams Rite 4300-4M-201-313 Steel Hawk 4300 eLatch

Adams Rite 4300-4M-201-313 Steel Hawk eLatch offers a robust solution for securing aluminum entrance doors with its innovative electrified deadlatch design. This model features a non-handed, narrow backset and operates on 12, 16, or 24 volts DC power, making it ideal for a variety of commercial applications. The Steel Hawk eLatch is always operable from the inside via a handle or paddle device, ensuring ease of use in emergency situations. With a monitored, mortised strike and flat dark bronze finish, this deadlatch is not only functional but also aesthetically pleasing. It includes a fail-secure lock with an optional form "C" latch status monitor, providing additional security and peace of mind. The latchbolt features a 5/8" x 1" throw made of durable stainless steel, while the auxiliary bolt enhances protection against forced entry. Installation is straightforward, as the 4300 eLatch interchanges without stile modification for MS Deadlocks or 4500 and 4900 Deadlatches. It accommodates door thicknesses of 1-3/4" and includes both flat and radius faceplates, which can be adjusted for right or left beveled edge doors. The quick connect plug-in type connector ensures efficient setup, making the Steel Hawk 4300 an exceptional choice for enhanced access control and security.

4300 Steel Hawk eLatch

Steel Hawk Electrified Deadlatch, 1-1/2" Backset, Monitored, Mortised Strike, Flat, Dark Bronze

The Steel Hawk 4300 Electrified Deadlatch (eLatch) combines non-handed, narrow backset, mechanical locking hardware with electrified access control. The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock with optional form "C" latch status monitor. The standard 4300 operates on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadlocks or 4500 and 4900 Deadlatches. 1-3/4" minimum door thickness required. Turn key, apply voltage, or operate handle or paddle to release the spring-loaded latchbolt. Electrically-rated for continuous duty for timed applications. Interface with access control. Uses any standard mortise cylinder with MS cam.

Combines non-handed, narrow backset, mechanical locking hardware with electrified access control.

• Cylinder Backset: 31/32”, 1-1/8”, and 1-1/2”
• Case: Measures 15/16” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 5/8” x 1” x 5/8” throw. Stainless steel.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• Faceplates: Measures 1” x 6-7/8”. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.
• Voltage: Field-selectable to match power source of 12, 16, or 24 VAC/VDC

Resources

• 4300 Catalog Page
• 4300 Series Electrified Deadlatch Installation Instructions
• 4300 Steel Hawk Electrified Deadlatch Cut Sheet
• 4600 Deadlatch Handle with 4300/4500/4900 Installation Instructions
• Mechanical to Electrical - Making the Jump
• Steel Hawk 4300 Electrified Latch Sell Sheet
• Video: 4300 Steel Hawk Electrified Deadlatch Installation
• What is Backset and How Do I Measure it?