Adams Rite 7160-540-628 Electric Strike 24VAC Fail Secure, Radius Corner, 1-1/4" x 4-7/8", Clear Anodized

Adams Rite Manufacturing 7160-540-628 Electric Strike offers a robust access control solution designed for mortise or cylindrical locksets with a latchbolt projection of up to 3/4 inch. This fail-secure electric strike is engineered for use in aluminum jambs, providing a seamless integration for remote electrical control of your entry points. With an exceptionally compact mechanism, it fits into jamb sections as shallow as 1-7/8 inches, making it a versatile option for various installations. The 7160-540-628 features a 1-1/4 inch by 4-7/8 inch faceplate with radiused corners, available in a sleek clear anodized aluminum finish (628/US28). Its stainless steel bolt retainer jaw ensures durability and reliability, while the strike location is centered on the latchbolt for optimal performance. The unit operates on 24VAC, with the electrical actuation unlocking the strike jaw to allow the door to open effortlessly. Field convertible between fail-safe and fail-secure modes, the strike provides flexibility to adapt to your security needs. Note that while it can operate intermittently, continuous usage in AC mode is not recommended. Suitable for installations demanding precision and reliability, the Adams Rite 7160-540-628 Electric Strike is an essential component for modern access control systems.

Electric Strike 24VAC Intermittent Fail Secure (FSE), (Field Reversible to FS), Radius Corner (RC), 1-1/4in x 4-7/8in Faceplate, 628/US28 Aluminum Clear Anodized

7160 Electric Strikes with 4-7/8" Faceplates are designed for mortise or cylindrical type locksets with up to 3/4" latchbolt projection without deadbolt. For use in aluminum jambs. Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4" latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-7/8". Fits existing prep for discontinued Adams Rite 7560, 7860 Electric Strikes.

Specifications:

• Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
• Case: Approximately 1" x 3-3/8" x 1-7/8" deep.
• Strike Lip: Basic 7160 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
• Strike Opening: 3/4" x 1-7/16" x 5/8" deep. Bolt retainer jaw is stainless steel. Strike location must be centered on latchbolt.
• Faceplate: Measures 1-1/4 x 4-7/8" Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.
• Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units "buzz" on operation.

Series Options:

• Available with two monitoring signal switches which sense whether latch bolt is in strike and whether strike jaw is blocked. Choice of voltage in AC and DC for intermittent or continuous duty. Specify assembled for either fail-secure (locked when unpowered) or fail-safe (locked when powered) operation, but can be field converted to the other mode.
• 4603 Rectifier: converts AC to DC, installs in low voltage line between transformer and strike. Rated 2 amps (200 PIV)
• 4605 Transformer: converts 120VAC to 12/24 VAC. Rated 40 Volt-amp output assures plenty of power for strike release. Patented mounting bracket fits in knockout hole of standard junction boxes.
• 4606 Transformer: Plug-in version for standard wall outlet.

Finishes:

• 313 - Dark Bronze Anodized (Similar to 613 - 10B - US10B)
• 335 - Black Anodized
• 626 - Satin Chrome (US26D - 26D)
• 628 - Clear Anodized (US28)

Features

• Strike Opening: 3/4" x 1-7/16" x 5/8" deep. Bolt retainer jaw is stainless steel. Strike location must be centered on latchbolt.
• Strike Lip: Basic 7160 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
• Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units "buzz" on operation.
• Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
• Faceplate: Measures 1-1/4 x 4-7/8" Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.
• Case: Approximately 1" x 3-3/8" x 1-7/8" deep.

Resources

• Cut Sheet