Adams Rite 7270-510-630-00 24VDC Electric Strike Fire Rated

Adams Rite 7270-510-630-00 Electric Strike 24VDC Fire Rated delivers exceptional security and convenience, tailored for use with cylindrical latches in commercial settings. This electric strike operates on a 24VDC power supply and features a fail secure design, ensuring that the door remains locked during a power failure. With a fire rating of 3 hours according to UL10C and CAN/ULC-S104 standards, it provides peace of mind in emergency situations. Designed for installation in hollow metal door jambs, this electric strike enables remote electrical control of doors equipped with key-in-knob or lever locksets, accommodating latchbolt projections of up to 5/8 inches. The strike jaw unlocks electronically, allowing the door to open effortlessly without manual operation of the latch. The unit measures approximately 1" x 3-3/8" x 1-5/8" deep, with a faceplate size of 4-7/8" x 1-1/4" featuring flat corners for a sleek appearance. Crafted from durable satin stainless steel, it is designed to withstand the rigors of commercial use while maintaining a modern aesthetic. With an amp draw of 0.17, the Adams Rite 7270-510-630-00 Electric Strike is a reliable choice for enhancing door security in any building.

Electric Strike 24VDC Fire Rat

Electric Strike, Fire Rated, Cylindrical Latches, 24VDC, Fail Secure, Satin Stainless Steel

For use in hollow metal door jambs.

Remote electrical control of any door equipped with cylindrical (key-in-knob/lever) type locksets with up to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself.

• UL10C, CAN/ULC-S104, fire rated 3 hr.
• Case: Approximately 1” x 3-3/8” x 1-5/8” deep.
• Strike Lip: Basic 7240 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge.
• Strike Opening: 5/8” x 1-7/16” x 9/16” deep. Bolt retainer jaw and strike lip are stainless steel. Strike accepts bolt from a variety of latchsets.
• Faceplate: Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square corners.
• Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Resources

• 7200 Electric Strikes Cut Sheet
• 7240 Fire-Rated Electric Strike for Metal Jamb w/Key-In-Knob Latches Installation Instructions
• 7270 Fire-Rated Electric Strike for Metal Jamb w/Mortise Latches Installation Instructions
• Electric Strike Catalog