Adams Rite 7270-510-630-50 24VDC Electric Strike Fire Rated

Adams Rite 7270-510-630-50 Electric Strike 24VDC Fire Rated is engineered for high-performance security in commercial environments. This fail-secure electric strike is designed specifically for use with cylindrical latches, allowing remote electrical control of doors equipped with key-in-knob or lever locksets featuring up to 5/8" latchbolt projection. Constructed from satin stainless steel, the strike not only meets UL10C and CAN/ULC-S104 standards with a fire rating of up to 3 hours, but also offers robust durability. The strike’s dimensions, approximately 1" x 3-3/8" x 1-5/8" deep, accommodate a variety of installations within hollow metal door jambs. The strike opening of 5/8" x 1-7/16" x 9/16" deep ensures compatibility with different latchsets, while the 1-1/4" x 4-7/8" flat faceplate with square corners presents a sleek profile. Designed for 24VDC operation with an amp draw of .17 Amps, this unit provides silent, continuous performance, making it suitable for both commercial applications and environments where noise reduction is essential. With its combination of functionality and reliability, the Adams Rite 7270-510-630-50 Electric Strike is a smart choice for enhancing security and access control in your building.

Electric Strike 24VDC Fire Rat

Electric Strike, Fire Rated, Cylindrical Latches, 24VDC, Fail Secure, Satin Stainless Steel

For use in hollow metal door jambs.

Remote electrical control of any door equipped with cylindrical (key-in-knob/lever) type locksets with up to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself.

• UL10C, CAN/ULC-S104, fire rated 3 hr.
• Case: Approximately 1” x 3-3/8” x 1-5/8” deep.
• Strike Lip: Basic 7240 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge.
• Strike Opening: 5/8” x 1-7/16” x 9/16” deep. Bolt retainer jaw and strike lip are stainless steel. Strike accepts bolt from a variety of latchsets.
• Faceplate: Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square corners.
• Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Resources

• 7200 Electric Strikes Cut Sheet
• 7240 Fire-Rated Electric Strike for Metal Jamb w/Key-In-Knob Latches Installation Instructions
• 7270 Fire-Rated Electric Strike for Metal Jamb w/Mortise Latches Installation Instructions
• Electric Strike Catalog