CRL 48SLPBS Brushed Stainless 48" Left-Handed "S" Ladder Style Pull, Back-to-BackC.R. Laurence 48SLPBS Brushed Stainless 48" Extra Length Left Handed "S" Ladder Style Back-to-Back Pull offers a sophisticated and durable solution for modern glass door applications. Designed specifically for tempered glass thicknesses ranging from 3/8" to 3/4" (10 to 19 mm), this pull handle features a robust 1-1/4" (32 mm) diameter heavy wall 304 alloy stainless steel tubing, ensuring both strength and style. The ladder pull is available in three lengths, with the 48" option providing ample reach for accessibility in commercial and residential settings. Designed for back-to-back mounting, it includes through-bolts for easy installation. The left-handed configuration ensures that exposed set-screws remain on the interior side of the door, maintaining a clean aesthetic from the exterior. Stocked in brushed stainless steel, the 48SLPBS model also offers custom finishes and sizes upon request, allowing for tailored solutions that meet specific architectural requirements. To ensure proper installation, two 5/8" (16 mm) diameter holes must be fabricated in the glass. For additional inquiries or to start a custom design, the C.R. Laurence Technical Sales Department is readily available for assistance. Elevate your glass entryways with this striking and functional hardware solution.
Brushed Stainless 48" Extra Length Left Handed "S" Ladder Style Back-to-Back Pull
- Three Sizes in Two Popular Finishes for 3/8" to 3/4" (10 to 19 mm) Glass
- Designer Left and Right Hand Models Available
- 1-1/4" (32 mm) Diameter Heavy Wall 304 Alloy Stainless Steel Tubing
- Custom Finishes and Sizes Available
CRL "S" Style Ladder Pull Handles are for back-to-back mounting with supplied through-bolts. They are intended for use on doors made from 3/8" to 3/4" (10 to 19 mm) thick tempered glass. Stock sizes range from 24" to 48" (610 mm to 1.22 m) overall height. Standard finishes are polished stainless and brushed stainless. The Pulls are handed left and right to ensure the exposed set-screws are always on the interior side of the door. Handing is determined from the exterior side looking in.
Custom sizes and finishes are available to meet architectural specifications. For additional information or to begin the custom design process, contact CRL Technical Sales Department.
SPECIFICATIONS:
For Use With: 3/8" to 3/4" (10 to 19 mm) Glass
Construction: 1-1/4" (32 mm) Diameter Stainless Steel Tubing
Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes
Product Warning:
This handle is "handed" and the opposite handed pull will be needed for pairs of doors. For single sided Ladder Pulls, please contact CRL Technical Sales Department.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Ship via: No UPS - Common Carrier Only
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 1-1/4 in. (32 mm)
Finish/ Color:: Brushed Stainless Steel
Glazing Thickness: 3/8 in. To 3/4 in. (10 mm To 19 mm)
Material: Stainless Steel
Mounting Center To Center: 36 in. (914 mm)
Mounting Hole Diameter: 5/8 in. (16 mm)
Mounting Type: Back-To-Back
Overall Length: 48 in. (1219 mm)
Shipping Limitations: UPS Oversize Rate
Resources
