CRL B0CBR112C Black 1.5" Open Cell Backer Rod - 100ft RollC.R. Laurence B0CBR112C Black 1-1/2" Open Cell Backer Rod - 100 Foot Roll offers a high-performance solution for effective sealant application in both vertical and horizontal wall joints. This soft, round, and easily compressible backer rod is crafted from open cell polyurethane foam, ensuring compatibility with all cold-applied sealants and eliminating the risk of sealant failures due to outgassing. Designed to control the depth of sealant, the backer rod acts as a reliable bond breaker, preventing unwanted adhesion on the bottom side. Its inherent flexibility accommodates joint variations, making it ideal for repairing damaged joints. With a temperature range of -65°F to 400°F (-54°C to 204°C), it is suitable for use with high-performance sealants such as silicones and urethanes. Proper installation is crucial; the backer rod should be oversized by 50% for a secure fit, allowing the sealant to form an optimal "hourglass" shape for extended service life. Packaged in easy-to-unroll spools, this 100-foot roll is ready for your next project. Please note, this backer rod is not suitable for horizontal traffic joints and should only be used with cold-applied sealants.
1-1/2" Open Cell Backer Rod - 100 Foot Roll
- Controls Sealant Depth and Functions as an Effective Bond Breaker
- Compatible with All Cold-Applied and Hot-Pour Sealants
- Soft Material Allows for Easy Compression During Installation
CRL Open Cell Backer Rod is a soft, round, and highly compressible polyurethane foam designed to back cold-applied sealant joints, or hot-pour sealants. Its open-cell structure allows it to flex and adapt to irregular or damaged joints without being affected by dynamic joint movement or stress.
CRL Open Cell Backer Rod is available for purchase in the following diameters – 5/8" to 2" (16 to 51 mm).
Unlike closed-cell rods, it eliminates the risk of outgassing when punctured, making it ideal for high-performance sealants like silicones and urethanes.
Temperature Limits:
-60° to +500°F (-15° to +260°C)
Application:
Best used in vertical and horizontal wall joints. Not recommended for horizontal traffic surfaces such as pavement joints.
Size Selection:
When choosing a CRL Open Cell Backer Rod, it is important for proper size selection as it controls the depth of the sealant bead and acts as a bond breaker to prevent back-side adhesion. It must be oversized approximately 50% wider than the joint to ensure a tight fit.
Storage:
Store in a well-ventilated are. Do not store products in direct sunlight. Keep away from heat sources and open flames.
Joint Preparation:
- New Joints: Clean thoroughly to remove form-release agents, curing compounds, or debris. Ensure the joint is clean and dry before applying sealant.
- Repairing Old Joints: Remove all old sealant or filler. Use wire brushing and air blasting for effective cleaning. If using an air compressor, ensure it has moisture and oil traps.
Installation Instructions:
- Prepare the surface by following the Joint Preparation directions.
- Measure and Select: Choose the correct backer rod size based on the joint width.
- Set Depth: Install the backer rod at the depth recommended by the sealant manufacturer, ensuring the sealant forms an "hourglass" shape.
- Use the Right Tools: Install with a blunt tool or roller. The Cat. No. T607CU605 or Cat. No. SBRR for smooth installation.
THE PRODUCT CAN COME IN DIFFERENT SHADES / TONES, BUT THIS WILL NOT AFFECT THE OVERALL PERFORMANCE OF THE PRODUCT.
Product Warning:
Not suitable for horizontal traffic joints—use only in vertical wall joints. Do not use with hot-applied sealants.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 1-1/2 in. (38 mm)
Finish/ Color:: Black
Rod Diameter: 1-1/2 in. (38 mm)
Roll Length: 100 ft.(30 m)
Shipping Limitations: None
Type: Open Cell
Resources
