CRL CM10X28PS Polished Stainless 10"x28" Back-to-Back Push-Pull Handle SetC.R. Laurence CM10X28PS Polished Stainless 10" x 28" Back-to-Back Straight Combination Push and Pull Handle Set offers a sophisticated solution for your glass entrance systems. Designed for use with monolithic tempered glass thicknesses ranging from 3/8" to 3/4" (10 to 19 mm), this handle set combines functionality with aesthetic appeal, available in five stunning architectural finishes. Constructed from 1" (25.4 mm) diameter stainless steel or brass tubing, this handle set exemplifies durability and style. It requires glass fabrication of three 5/8" (16 mm) diameter holes to accommodate various center-to-center configurations, including 10" (254 mm), 12" (305 mm), 28" (711 mm), and 33" (838 mm). The offset is set at 3" (76 mm) center-to-center, providing flexibility in installation. Included with the handle set are through-bolts for secure glass mounting, along with matching finish metal washers and rubber gaskets to ensure a polished look. While stainless steel is resistant to corrosion, periodic maintenance is recommended to preserve its factory finish. With C.R. Laurence's commitment to quality, this handle set not only enhances the functionality of your glass installations but also elevates their overall design.
Polished Stainless 10" x 28" Back-to-Back Straight Combination Push and Pull Handle Set
- For Use with 3/8" to 3/4" (10 to 19 mm) Glass
- 1" (25.4 mm) Diameter Stainless Steel or Brass Tubing
- Five Beautiful Architectural Finishes
- Use Monolithic Tempered Glass
This
CRL Glass Mounted Straight Push/Pull Handle Combination is available in two different sizes and many attractive architectural finishes.
SPECIFICATIONS:
For Use With: 3/8" to 3/4" (10 to 19 mm) Glass
Construction: 1" (25 mm) Diameter
Stainless Steel or Brass Tubing
Glass Fabrication Required:
Three 5/8" (16 mm) Diameter Holes,
10" (254 mm) Center-to-Center
12" (305 mm) Center-to-Center
28" (711 mm) Center-to-Center
33" (838 mm) Center-to-Center
Offset: 3" (76 mm) Center-to-Center
Optional 1-1/4" (32 mm) Diameter
Available on Special Order
INCLUDES:
2 Each: Through-Bolts for Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal Washers and Rubber Gaskets
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 1 in. (25 mm)
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 3/8 in. To 3/4 in. (10 mm To 19 mm)
Mounting Type: Back-to-Back
Pull Mounting Center To Center: 10 in. (254 mm)
Push Mounting Center To Center: 28 in. (711 mm)
Shipping Limitations: None
Resources
