CRL CM24X24BS Brushed Stainless 24" Back-to-Back Glass Pull HandleC.R. Laurence CM24X24BS Brushed Stainless 24" Glass Mounted Back-to-Back Standard Pull Handle offers a perfect blend of style and functionality for modern glass installations. Designed for use with monolithic tempered glass ranging from 3/8" to 3/4" (10 to 19 mm) thickness, this handle features a robust 1" (25 mm) diameter construction made from brushed stainless steel or brass, ensuring durability and a sleek appearance. The handle is completely equipped with matching finish metal washers and through-bolts for seamless mounting, making installation straightforward. It boasts a center-to-center offset of 3" (76 mm) and requires two 5/8" (16 mm) diameter holes for glass fabrication, providing a secure fit for your glass doors or panels. Available in up to five architectural finishes, this pull handle can complement a variety of design aesthetics while adding a sophisticated touch to any setting. To maintain its factory finish, periodic maintenance is recommended, as stainless steel, while resistant to corrosion, is not entirely rust or stain proof. With its combination of aesthetic appeal and high-grade materials, the CM24X24BS is an ideal choice for building professionals and discerning homeowners looking to enhance their glass architecture.
Brushed Stainless 24" Glass Mounted Back-to-Back Standard Pull Handle
- Stocked in Up to Five Architectural Finishes
- For Use with 3/8" to 3/4" (10 to 19 mm) Glass
- Complete with Matching Finish Metal Washers and Through-Bolts for Mounting
- Use Monolithic Tempered Glass
This
CRL Glass Mounted Standard Pull Handle is available in three sizes and in many different architectural finishes.
SPECIFICATIONS:
For Use With: 3/8" to 3/4" (10 to 19 mm) Glass
Construction:
1" (25 mm) Diameter Stainless Steel or Brass
Tubing. *1-1/4" (32 mm) Diameter Stainless
Steel (Cat. No. CD24X24BS125 Model only).
Offset: 3" (76 mm) Center-to-Center
Glass Fabrication Required:
Two 5/8" (16 mm) Diameter Holes
INCLUDES:
2 Each: Through-Bolts for Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal Washers and Rubber Gaskets
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 1 in. (25.4 mm)
Finish/ Color:: Brushed Stainless Steel
Glazing Thickness: 3/8 in. To 3/4 in. (10 mm To 19 mm)
Mounting Center To Center: 24 in. (610 mm)
Mounting Hole Diameter: 5/8 in. (16 mm)
Mounting Type: Back-to-Back
Shipping Limitations: None
Style Washer Diameter: 1-1/4 in. (32 mm)
Style Washers: Yes
Resources
