CRL EF112C 1-1/2" Closed Cell Backer Rod - 102' BoxC.R. Laurence EF112C 1-1/2" Closed Cell Backer Rod - 102' Box offers a reliable solution for controlling sealant application thickness in construction and glazing projects. This round, flexible backer rod is made from closed cell polyethylene foam with an exterior "skin," ensuring it won’t bond to sealants, eliminating the need for a bond breaker. Its compatibility with all cold-applied sealants makes it a versatile choice for various applications. Designed to fit joints ranging from 3/16" to 1-5/8", this backer rod limits sealant depth, which promotes proper joint design and minimizes waste. Withstanding temperature extremes from -45°F to 160°F, it is chemically inert and resistant to oils, gasoline, and solvents, ensuring durability and performance. The rod's round shape encourages the preferred "hourglass" sealant profile, making it ideal for expansion and control joints in curtain walls, parking decks, and window frame perimeters. Proper size selection is crucial; the backer rod should be approximately 25% wider than the joint for a secure fit. Installation is straightforward with the use of a blunt tool or roller, such as the CRL Cat. No. SBRR Backer Rod Roller. With a total length of 102 feet in the box, this product is ready to meet your sealing needs effectively.
1-1/2" Closed Cell Backer Rod - 6 Foot Cut Length Pieces
- Easy Control of Sealant Application Thickness
- Non-Bonding Surface – No Additional Bond Breaker Required
- Compatible with All Cold-Applied Sealants
CRL Closed Cell Backer Rod is a round, flexible polyethylene foam with an exterior "skin" designed to control sealant depth and promote proper joint design. The backer rod serves as a backing material for elastomeric and other cold-applied sealants preventing excessive use of the sealant. The backer rod’s non-bonding surface prevents sealants from sticking and allows the sealant to move and flex reducing stress at adhesion points improving sealant performance.
CRL Closed Cell Backer Rod is available for purchase in the following diameters - 1/4" to 2" (7 to 50mm)
CRL Closed Cell Backer Rod will not absorb water or wick water to joint walls, which could cause adhesive failure. It is compatible with cold-applied sealants, and its round shape promotes the preferred "hourglass" shape for joint sealants.
Temperature Limits:
-45°F to 160°F (-43°C to 71°C)
Application:
Backer Rod is commonly used in expansion/control joints with cold-applied sealants. Typical applications include curtain walls, construction partitions, precast panels, parking decks, door and window frames, coping, floor and deck joints, horizontal traffic joints, and building rehab projects.
Size Selection:
When choosing a CRL Closed Cell Backer Rod, it is important for proper size selection as it controls the depth of the sealant bead and acts as a bond breaker to prevent back-side adhesion. It must be oversized approximately 25-50% wider than the joint to ensure a tight fit.
Storage:
Store in a well-ventilated are. Do not store products in direct sunlight. Keep away from heat sources and open flames.
Joint Preparation:
- New Joints: Clean thoroughly to remove form-release agents, curing compounds, or debris. Ensure the joint is clean and dry before applying sealant.
- Repairing Old Joints: Remove all old sealant or filler. Use wire brushing and air blasting for effective cleaning. If using an air compressor, ensure it has moisture and oil traps.
Installation Instructions:
- Prepare the surface by following the Joint Preparation directions.
- Measure and Select: Choose the correct backer rod size based on the joint width.
- Set Depth: Install the backer rod at the depth recommended by the sealant manufacturer, ensuring the sealant forms an "hourglass" shape.
- Use the Right Tools: Install with a blunt tool or roller. The Cat. No. T607CU605 or Cat. No. SBRR for smooth installation.
THE PRODUCT CAN COME IN DIFFERENT SHADES / TONES, BUT THIS DOES NOT AFFECT THE OVERALL PERFORMANCE OF THE PRODUCT.
Product Warning:
Do not tear, puncture, crease, over compress or stretch during insertion. Always use the correct size Backer Rod for the particular application. Refer to the size selection chart. Do not use with hot-applied sealants or hot melt adhesives where their surface temperature is over 160ºF (71ºC).
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Ship via: No UPS - Common Carrier Only
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 1-1/2 in. (38 mm)
Feet Per Box: 102 ft. (31 m) - 17 Pieces @ 6 ft. Each
Finish/ Color:: Gray
Length: 17 pcs at 6 ft. (1.83 m)
Rod Diameter: 1-1/2 in. (38 mm)
Shipping Limitations: UPS Oversize Rate
Type: Closed Cell
Resources
