CRL GEN3800RB Oil Rubbed Bronze Geneva 380 Adjustable 180 Glass-to-Glass Hinge

CRL GEN3800RB Oil Rubbed Bronze Geneva 380 Adjustable 180 Glass-to-Glass Hinge

C.R. Laurence GEN3800RB Oil Rubbed Bronze Geneva 380 Series Adjustable 180 Degree Glass-to-Glass Hinge is a remarkable addition to your shower door hardware, designed for both functionality and aesthetics. This innovative hinge allows for seamless adjustments up to 90 degrees after installation, ensuring perfect door alignment without the need to remove the door. Simply loosen the Allen set screws, adjust to the desired position, and retighten for a self-centering closure. Crafted from solid brass, the GEN3800RB hinge is available in a stunning oil rubbed bronze finish, enhancing the elegance of any shower space. It accommodates monolithic tempered glass thicknesses of 5/16" to 1/2" (8 mm to 12 mm) and can support door weights of up to 120 lbs. (54 kg) when using three hinges, with a maximum door width of 32" (813 mm). Designed to swing 90 degrees in and out, this hinge is perfect for both inward and outward opening doors, providing flexibility and convenience. A three-year warranty underscores its quality, while custom finishes are available upon request. Note that the hinge is intended for residential or hotel shower use, and it includes necessary gaskets and screws for installation. Elevate your shower design with the C.R. Laurence Geneva 380 Series hinge, where style meets exceptional engineering.

Oil Rubbed Bronze Geneva 380 Series Adjustable 180 Degree Glass-to-Glass Hinge

• Adjustable to Any Angle Up to 90 Degrees without Removing Door
• Available in Several Beautiful Finishes
• Three Year Warranty
• Adjustable 180 Degree Glass-to-Glass
• Use Monolithic Tempered Glass

The CRL Adjustable Geneva Series has taken our popular Geneva Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90 degree inward and 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.


Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Features: Adjustable to any angle up to 90 degree without having to take door down.
Construction: Solid Brass
Hinge Swings: 90 degree in and 90 degree out (at factory set position).
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details.

Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department.


Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Resources

• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Quote Request Form
• Frameless Shower Door Quote Request Form
• GEN380 Detailed CAD Drawings.dwg
• GEN380 Detailed CAD Drawings.pdf
• GEN380 Template
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide