CRL GEN537BR Polished Brass Geneva 537 Wall Mount Full Back Plate Hinge, 5 Offset

CRL GEN537BR Polished Brass Geneva 537 Wall Mount Full Back Plate Hinge, 5 Offset

C.R. Laurence GEN537BR Polished Brass Geneva 537 Series Wall Mount Full Back Plate Standard Hinge with 5 Degree Offset is designed to enhance the beauty and functionality of your shower enclosure. This hinge accommodates 5/16" (8 mm) to 1/2" (12 mm) tempered glass, offering a robust solution for doors weighing up to 120 lbs. (54 kg) when using three hinges. The self-centering feature ensures smooth operation, while the reversible 5-degree pivot pin allows for a tighter closure into the shower interior, providing a seamless appearance. Crafted from solid brass with stainless steel moving components, the Geneva hinge is as durable as it is stylish. Available in a lustrous polished brass finish, this hinge adds a touch of elegance to any bathroom design. The hinge swings 90 degrees in and out, making it suitable for various layouts. With a three-year warranty, you can trust its quality and performance. For off-angle installations, custom pivot pins are available to meet specific design needs. The hinge includes necessary gaskets and screws, but be sure to purchase the Cat. No. GEN13 Gasket Pack separately for 5/16" thick glass. Elevate your shower experience with the reliability and aesthetic appeal of the C.R. Laurence Geneva hinge series.

Polished Brass Geneva 537 Series Wall Mount Full Back Plate Standard Hinge With 5 Degree Offset

• Self-Centering with Reversible 5 Degree Pivot Pin
• Available in Several Beautiful Finishes
• Three Year Warranty
• 5 Degree Pre-Set Model (Factory Set for 5 Degree Tighter Closure Into Shower Interior)
• Use Monolithic Tempered Glass

The CRL Geneva Series of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.


Standard Reversible Pivot Pin: Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

SPECIFICATIONS:
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Feature: Offers choice of Standard Model factory set at standard 0 degree closing position, or 5 degree Pre-Set Model for tighter closure into shower interior.
Construction: Solid Brass
Hinge Swings: 90 degree in and 90 degree Out
Closing Type: Self-Centering when within 15 degree of Closed Position
Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Custom finishes are available on request. Contact Technical Sales Shower Door Division.


Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Brass Finish Advisory:

Resources

• Brass Finish Disclaimer
• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Quote Request Form
• GEN537 Detailed CAD Drawings.dwg
• GEN537 Detailed CAD Drawings.pdf
• GEN537 Template
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide