CRL LS106BS Laguna Series Brushed Stainless Sliding Tube Wall Mount End CapC.R. Laurence LS106BS Brushed Stainless Laguna Series Top Sliding Tube Wall Mount End Cap is an essential component for installations where the top sliding tube terminates at a wall. Designed to enhance functionality and aesthetics, this non-handed fitting facilitates seamless integration with the Cat. No. LS104BS Top Sliding Tube, making it an ideal choice for a variety of projects. Key features of the LS106BS include an elongated hole and internal sleeve, which allow for quick and easy final adjustments during installation. This end cap is built to support panels with a minimum width of 37-13/16" (960 mm) and a maximum width of 53-9/16" (1.36 m), with a maximum panel weight capacity of 220 lbs. (100 kg). Note that the panel height should not exceed 2.5 times its width, and the maximum available length of the top track is 104" (2.64 m). It’s crucial to consult a structural engineer to ensure the suitability of this product for your specific use and site conditions. Additionally, the LS106BS is not designed for use with laminated glass. With its brushed stainless steel finish, it combines durability with a modern look, making it a reliable choice for any architectural application.
Brushed Stainless Laguna Series Top Sliding Tube Wall Mount End Cap
- Used for Installations Where Top Sliding Tube Terminates at Wall
The
CRL Top Sliding Tube Wall Mount End Cap is a non-handed fitting. It is used in conditions where the Cat. No. LS104BS Top Sliding Tube terminates into a wall. The elongated hole and internal sleeve make final minor adjustments quick and easy. Fastener to wall is not included.
SYSTEM LIMITATIONS:
The following are recommended limitations for this system:
Minimum Panel Width: 37-13/16" (960 mm)
Maximum Panel Width: 53-9/16" (1.36 m)
Maximum Panel Weight: 220 Lbs. (100 kg)
The panel height should never exceed 2.5 times the width of the panel. Maximum available length of the top track is 104" (2.64 m).
Please contact our Technical Sales Department if any of these limitations cannot be met.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
NOTE: These Fittings are not for use with Laminated Glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Brushed Stainless Steel
Shipping Limitations: None
Resources
