CRL PH11CPS Polished Stainless Steel Bottom Door Patch with 1NT301 InsertC.R. Laurence PH11CPS Polished Stainless Bottom Door Patch with 1NT301 Insert combines functionality with elegance, making it an essential component for any glass door installation. Designed for use with either 3/8" or 1/2" (10 or 12 mm) glass, this patch fitting provides a secure and stylish solution for your door needs. With a pivot setback of 2-9/16" (65 mm), it is compatible with tapered style spindle floor closers or free swing pivots, ensuring seamless operation. This product is engineered to support glass doors with a maximum height of 102" (2.59 m), a weight limit of 194 lbs. (88 kg), and a width of up to 42" (1.92 m). For doors exceeding these specifications, full door rails are recommended for optimal support. The included gaskets facilitate a perfect fit, while the template and instructions simplify the installation process. Please note that glass fabrication is required, including one 3/4" (19 mm) diameter hole and a corner notch. The polished stainless steel finish not only enhances durability but also contributes to a sophisticated aesthetic. Regular maintenance is recommended to preserve its factory finish, as stainless steel is resistant but not completely stain-proof. Elevate your project with the reliability and style of C.R. Laurence’s PH11CPS Bottom Door Patch.
Polished Stainless Bottom Door Patch with 1NT301 Insert
- 2-9/16" (65 mm) Pivot Setback
- For 3/8" or 1/2" (10 or 12 mm) Glass
The
CRL Bottom Door Patch Fitting includes the Catalog Number
1NT301 Insert for use with tapered style spindle Floor Closers or Free Swing Pivots. Covers are available in four standard finishes. Gaskets are supplied that allow this >Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 102" (2.59 mm)
Maximum Weight: 194 Lbs. (88 kg)
Maximum Width: 42" (1.92 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch
COMES WITH:
Template and Instructions
Product Warning:
These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Height: 176 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Insert Type: 1NT301
Pivot Setback: 2-9/16
Shipping Limitations: None
Type: Bottom
With Insert: Yes
Resources
