CRL PH20CA Satin Anodized Adjustable North American Top Door Patch FittingC.R. Laurence PH20CA Satin Anodized Adjustable North American Top Door Patch Fitting offers a high-performance solution for aligning glass doors with precision. Featuring an adjustable pivot insert, this fitting allows for three degrees of movement, ensuring optimal door alignment to the jamb when closed. Designed for monolithic tempered glass, it accommodates both 3/8" and 1/2" (10 or 12 mm) glass thicknesses, making it versatile for various applications. With a pivot setback of 2-3/4" (70 mm), this fitting supports maximum door dimensions of 102" (2.59 m) in height and 42" (1.07 m) in width, while safely handling weights up to 194 lbs. (88 kg). For glass fabrication, a 3/4" (19 mm) diameter hole and corner notch are required. Installation is straightforward, thanks to the included template and instructions. Available in a sleek satin anodized finish, the PH20CA fitting blends seamlessly with modern architectural designs. It is essential to note that this fitting is not compatible with laminated glass and should not be used with European pivot sets. Elevate your glass door installations with the C.R. Laurence PH20CA, where quality meets functionality.
Satin Anodized Adjustable North American Top Door Patch Fitting
- Adjustable Pivot Insert Allows Three Degrees Movement for Proper Door Alignment
- 2-3/4" (70 mm) Pivot Setback
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Use Monolithic Tempered Glass
The
CRL Adjustable Top Door Patch Fitting includes an adjustable pivot insert that allows for 3 degrees of movement for proper alignment of the door to the jamb when in the closed position. For use with our
CRL9970 Overhead Concealed Door Closer. Finished covers are available in five standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Weight: 194 Lbs. (88 kg)
Maximum Width: 42" (1.07 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch
COMES WITH: Template and Instructions
DO NOT USE WITH:
European 2-9/16" (65 mm) Pivot Setback Overhead Concealed Door Closers. They Require European Door Patch Fitting PH21C.
Product Warning:
These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Height: 176 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Satin Anodized
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Pivot Setback: 2-3/4
Series: North American
Shipping Limitations: None
Type: Top
With Insert: Yes
Resources
