CRL RDTRK Rear Defroster Tab Repair Kit

C.R. Laurence RDTRK Rear Defroster Tab Repair Kit offers an efficient solution for restoring functionality to rear defroster power tabs. This user-friendly kit features a two-part conductive adhesive that ensures a reliable repair in just a few simple steps. The kit includes equal parts of Part A Epoxy and Part B Hardener, which can be easily mixed and applied using the supplied applicator stir stick. For optimal results, apply the connector tab and hold it in place for approximately 10 minutes before utilizing heat to expedite the curing process. It is recommended to cure the adhesive at a temperature range of 100-150°F (38-65°C) for 30 minutes with a hair dryer, lamp, or other heating sources. Alternatively, for air curing, an ambient temperature above 75°F (24°C) is required for at least 12 hours to achieve a complete cure. Designed for convenience, the RDTRK Repair Kit ships via UPS and comes in a case quantity of 20. Please note that the product carries a warning regarding reproductive harm as per California Proposition 65. With no shipping limitations, this repair kit is an essential addition to your automotive glazing supplies, ensuring your rear defroster operates effectively once again.

Rear Defroster Tab Repair Kit

• Easy-to-Use Two-Part Conductive Adhesive
• Conductive Adhesive for the Repair of Rear Defroster Power Tabs
• Use heat for faster curing

The CRL Rear Defroster Connector Repair Kit is easy-to-use. Just mix equal parts of Part A Epoxy with Part B Hardener and apply with the supplied applicator stir stick. Apply the connector tab and hold in place for 10 minutes before heating. Always use a minimal amount for fastest cures. Heat cure is highly recommended, cure at 100-150°F (38-65°C) for 30 minutes using a hair dryer, lamp or other heating source. For air cure, ambient temperature must be above 75°F (24°C) for at least 12 hrs to fully cure.