CRL TD335P 3M Trizact 3" A35 PSA Polishing Disc

CRL TD335P 3M Trizact 3" A35 PSA Polishing Disc

CRL TD335P 3M Trizact 3" A35 PSA Polishing Disc is a revolutionary tool for glass scratch repair, utilizing the advanced 3M® Trizact® abrasive system. This product features a unique design with pyramidal abrasives that ensure a cleaner, long-lasting performance while effectively removing scratches and imperfections from a variety of glass surfaces. The Trizact® system is incredibly user-friendly, making it ideal for both beginners and professionals. With several grades available, you can achieve a range from a fine ground finish to crystal-clear results, ensuring your glass surfaces look as good as new. Whether you’re dealing with light scuffs, deep scratches, or unsightly stains, this polishing disc is your go-to solution. Designed for wet use with plain water, the Trizact® requires thorough polishing at each grade to eliminate any remaining defects, guaranteeing a flawless finish. The versatility of the CRL TD335P allows it to be used on flat and curved glass, making it an essential addition to any glass fabrication process. For optimal safety, always wear appropriate protective gear while using this product. Elevate your glass finishing capabilities with the reliable performance of the C.R. Laurence 3M Trizact Polishing Disc.

3M Trizact 3" A35 PSA Polishing Disc

• 3M® Trizact® - A Cleaner, Long-Lasting Abrasive System for Glass Scratch Repair
• Starter and Professional Kits are Both Easy to Use
• Several Grades Available

CRL introduced 3M® Trizact® Abrasive Film to the glass industry. This material uses natural abrasive formed in the shape of small pyramids, and provides uniform layers of abrasive throughout the pyramid. As abrasive particles are exposed and used, they fall down and are flushed away between the pyramids.


This easy-to-use system uses five grades to go from a fine ground finish on glass to absolutely clear! It is perfect for scratch removal, edge finishing and a variety of other applications. No more messy slurries and contamination problems!

The potential for this material in your glass fabrication process is amazing! For a small investment, you can purchase equipment and supplies to remove scratches in flat and curved glass, and to create your own finished products, including "high polish" work.

3M® Trizact® will remove light or deep scratches, scuffs, wiper marks, and stains on a variety of glass surfaces. Makes an old windshield or table top look like new again!

3M® Trizact® should always be used wet, with plain water. Polish requires using each grade long enough to remove all scratches from the previous grade. If this is not done, small defects will remain in the finished product. When using "high polish clear" (cerium), work surface must be flushed with water between stages to remove loose abrasive.


Product Warning:

Always wear the proper respiratory and protective safety gear as specified by the manufacturer when using this product. Failure to so can lead to immediate and long-term injury.

Resources

• Trizact Glass Defect Repair System Instructions AVDB3136-Trizact-Glass-Defect-Repair-System.pdf