CRL V1E380CH Polished Chrome Vienna 380 Series 180 Adjustable Glass-to-Glass Hinge

CRL V1E380CH Polished Chrome Vienna 380 Series 180 Adjustable Glass-to-Glass Hinge

C.R. Laurence V1E380CH Polished Chrome Vienna 380 Series Adjustable 180 Degree Glass-to-Glass Hinge offers a sophisticated solution for modern shower door installations. This innovative hinge allows for adjustment to any angle up to 90 degrees without the need to remove the door, ensuring a seamless fit and functionality. Crafted from solid brass and available in multiple stunning finishes, the hinge is designed to complement various interior aesthetics. The hinge is engineered for use with monolithic tempered glass, accommodating glass thicknesses from 3/8" (10 mm) to 1/2" (12 mm). With two hinges, it can support doors weighing up to 110 lbs. (50 kg), and with three hinges, the capacity increases to 140 lbs. (63 kg), with a maximum door width of 36" (914 mm). The standard reversible pivot pin features markings for 90 and 85 degrees, enabling precise installation even in unique configurations. Self-centering capabilities ensure that the door aligns perfectly when within 15 degrees of the closed position, enhancing usability. Included with the hinge are gaskets, screws, and glass fabrication dimensions, making installation straightforward. Please note that this hinge is designed exclusively for residential or hotel shower use. For custom finishes and specific installation needs, contact the C.R. Laurence Technical Sales team.

Polished Chrome Vienna 380 Series Adjustable 180 Degree Glass-to-Glass Hinge

• Adjustable to Any Angle Up to 90 Degrees without Removing Door
• Available in Several Beautiful Finishes
• 3 Year Warranty
• Adjustable 180 Degree Glass-to-Glass
• Use Monolithic Tempered Glass

The CRL Adjustable Vienna Series has taken our popular Vienna Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is hung. Simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position. The door can swing 90 degrees inward and 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.


STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).

Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm).

SPECIFICATIONS:
Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Feature: Adjustable to Any Angle Up to 90 Degrees without Having to Take Door Down
Construction: Solid Brass
Hinge Swings: 90 degree In and 90 degree Out (at factory set position).
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required
Includes: Gaskets, Screws, and Glass Fabrication Dimensions.
Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

NOTE: Door Glass Width May Require Alteration From Standard Clearance Deductions When Adjusting Angles. Call for Details.

Custom finishes are available on request. Contact CRL Technical Sales Shower Door Department.


Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Resources

• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Quote Request Form
• Frameless Shower Door Quote Request Form
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide
• V1E380 Detailed CAD Drawings.dwg
• V1E380 Detailed CAD Drawings.pdf
• V1E380 Template