CRL Z910MBL Matte Black Z-Series Flat Base Stainless Steel Clamp for 3/8" Glass

CRL Z910MBL Matte Black Z-Series Flat Base Stainless Steel Clamp for 3/8" Glass

C.R. Laurence Z910MBL Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass is a versatile solution designed specifically for glass thicknesses of 3/8" (10 mm). Crafted from durable stainless steel, this clamp is ideal for a variety of applications including mezzanines, partitions, railings, and windbreaks, ensuring both strength and aesthetic appeal. With its flat base design, the Z910MBL easily attaches to square tubing or other flat surfaces, making installation straightforward. For added support, a steel pin is available, requiring a 1/2" (12 mm) hole for optimal performance. The included rubber gaskets ensure a snug fit, while replacement gaskets can be conveniently ordered using CRL Cat. No. Z38SG. This clamp not only excels in functionality but also offers a sleek matte black finish, enhancing the modern look of any space. Custom painted finishes are available upon request, allowing you to match your project’s specific aesthetic needs. Whether used in exterior or interior applications, the Z910MBL clamp is built to withstand daily use, making it a reliable choice for both professionals and discerning homeowners. For enhanced stability, CRL recommends pinning each glass panel as required, ensuring safety and longevity.

Matte Black Z-Series Square Type Flat Base Stainless Steel Clamp for 3/8" Glass

• Designed to Accommodate Glass Thickness of 3/8" (10 mm)
• Replacement Gaskets are Available by Ordering CRL Cat. No. Z38SG
• For Use on Mezzanines, Partitions, Railings and Windbreaks
• Use Monolithic Tempered Glass
• Steel Pin Available for Additional Glass Support
• Custom Painted Finishes Available Upon Request

This CRL Z-Series Square Type Flat Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.


For securing the Z-Clamp to thin wall tubing (less than 1/8"), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32" (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16" Mandrel and Nosepiece.

NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses: For 3/8" (10 mm).
Base Design: Flat.
For Use With: Square Tubing or Other Flat Surfaces.
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication:
For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support.
For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.
Replacement Hardware: CRL ZCS5X15SS for Replacement Screws


Product Warning:

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Resources

• Architectural Glass Railing Systems and Hardware Catalog
• Architectural Glass Railing Systems and Hardware Catalog
• Z-Clamp Tightening Sequence Information
• Z810 Z910 Detailed CAD Drawings.dwg
• Z810 Z910 Detailed CAD Drawings.pdf
• Z810 Z910 Glass Fabrication Template.dwg
• Z810 Z910 Glass Fabrication Template.pdf