Don-Jo 1157147-628 39CTC 90 Offset Push/Pull Hardware Set

Don Jo 1157147-628 39CTC 90 Degree Offset Push/Pull Set is designed to enhance accessibility and functionality in commercial settings. This set includes both the 1157 push bar and the 147 offset door pull, ensuring a cohesive look and reliable performance. With a 39-inch center-to-center (CTC) measurement and a 1-inch diameter, the push bar features a projection of 3-1/2 inches and a clearance of 2-1/2 inches, making it easy to operate without the need for tight grasping or pinching. The offset door pull measures 10 inches CTC and also boasts a 1-inch diameter, with similar projection and clearance dimensions. Its overall length of 40 inches for the push bar and 11 inches for the pull ensures that both components are user-friendly and accessible. Crafted from durable aluminum with a satin aluminum clear anodized finish, this push/pull set combines practicality with a sleek, matte silver aesthetic. Ideal for commercial installations, the Don Jo Push/Pull Set is built to withstand frequent use while meeting accessibility standards. With a limited one-year warranty, you can trust in the quality and durability of this essential hardware set, making it a smart choice for any building professional or knowledgeable homeowner.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1157 and 147, Push Bar, 39" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 40" Overall, Offset Door Pull, 90 Deg., 10" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 11" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet