Don-Jo 1157147-630 39CTC 90 Offset Push/Pull Hardware Set

Don Jo 1157147-630 39CTC 90 Degree Offset Push/Pull Set combines functionality and style, making it an essential addition to any commercial space. This set includes both the 1157 push bar and the 147 offset door pull, designed for ease of use and accessibility. With a 39-inch center-to-center (CTC) distance and a 1-inch diameter, the push bar provides a solid grip, while the offset pull features a 90-degree design that enhances usability. The push/pull set boasts a 3-1/2-inch projection and 2-1/2 inches of clearance, ensuring ample space for hands while maintaining a sleek appearance. Crafted from durable stainless steel with a satin finish (630/US32D), it offers a contemporary matte silver look that complements a variety of architectural styles. Designed with accessibility in mind, the hardware meets ADA guidelines, allowing for easy operation without the need for tight grasping or pinching. Ideal for commercial installations, this set is backed by a one-year limited warranty, providing peace of mind for users. Whether outfitting a new building or upgrading existing hardware, the Don Jo 1157147-630 Push/Pull Set is a practical choice that enhances both functionality and aesthetics.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1157 and 147, Push Bar, 39" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 40" Overall, Offset Door Pull, 90 Deg., 10" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 11" Overall, Satin Stainless Steel Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet