Don-Jo 147-313 33CTC 33 CTC Push Bar

Don Jo 147-313 33CTC Push Bar provides a robust and accessible solution for commercial door hardware needs. Designed with a 33-inch center-to-center measurement, this push bar features a 1-inch diameter and a 3-1/2-inch projection, ensuring ease of use while maintaining a sleek profile. The overall length of 34 inches makes it ideal for various door applications, while the 2-1/2-inch clearance caters to accessibility standards. Crafted from durable aluminum with a striking dark bronze anodized finish, the Don Jo push bar not only enhances the aesthetic of any entryway but also withstands the rigors of daily use in commercial environments. The design adheres to accessibility guidelines, allowing for one-handed operation without the need for tight grasping or twisting, making it user-friendly for all individuals, including those with limited mobility. This push bar falls under the Door Pulls and Push and Pull Plates series, ensuring compatibility with a range of door types. With its commercial installation specification and a limited one-year warranty, the Don Jo 147-313 Push Bar is a reliable choice for both functionality and style in your building's entryways. Each unit is packaged individually for convenient shipping via UPS.

33 CTC Push Bar

Door Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Dark Bronze Anodized Aluminum Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet