Don-Jo 147-613 31CTC 31 CTC Push Bar

Don Jo 147-613 31CTC 31 CTC Push Bar is designed with accessibility and functionality in mind, making it an essential addition to any commercial setting. Measuring 31 inches from center to center (CTC), this push bar features a robust 1-inch diameter and a projection of 3-1/2 inches, ensuring easy operation for all users. With a clearance of 2-1/2 inches and an overall length of 32 inches, it provides a comfortable grip that complies with accessibility standards, allowing for single-handed operation without the need for tight grasping or pinching. Crafted from durable bronze and finished in an elegant oil-rubbed bronze (613/US10B), this push bar not only withstands the rigors of daily use but also adds a sophisticated touch to any door. It is ideal for various commercial applications, ensuring both style and practicality. The design includes lever-operated mechanisms and push-type features, making it suitable for various door types, including sliding doors. Backed by a 1-year limited warranty, the Don Jo 147-613 is shipped ready for installation and is compatible with standard commercial settings. Upgrade your door hardware today with this reliable and aesthetically pleasing push bar, enhancing both functionality and accessibility.

31 CTC Push Bar

Door Push Bar, 31" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 32" Overall, Oil Rubbed Bronze Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet