Falcon Lock MEL-25V-L-DT-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction SVR Exit Device with Quantum Lever Trim

Falcon Lock MEL-25V-L-DT-QUA-US26D-48X96-RHR KIT is an advanced motorized electric latch retraction (MEL) system designed to enhance security and convenience in multifamily and commercial properties. This surface vertical rod exit device features a sleek satin chrome finish (US26D) and comes with a Quantum lever dummy trim for a polished appearance. With energy-efficient operation powered by a 24VDC motor, this Grade 1 exit device ensures reliable performance and extended wire runs while maintaining mechanical egress. The modular design allows for easy installation of the MEL conversion kit onto existing Falcon 24 or 25 Series exit devices, enhancing versatility and usability. The self-calibrating motor assembly and built-in diagnostics promote hassle-free installation and maintenance. This exit device is vandal-resistant, detecting and responding to tampering, ensuring robust security. It seamlessly integrates with credential readers for authorized access and can be paired with power transfers for optimal functionality. The MEL-25V is compatible with a variety of power supplies and monitoring systems, making it an ideal choice for modern security applications. The Falcon Lock MEL-25V-L-DT-QUA-US26D-48X96-RHR KIT is your go-to solution for reliable and efficient exit control that doesn’t compromise on security or aesthetics.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged