Falcon Lock MEL-25V-NL-US26D-36X96 Motorized Electric Latch Retraction SVR Exit Device, Nightlatch Pull Trim 512NL

Falcon Lock MEL-25V-NL-US26D-36X96 KIT is a sophisticated motorized electric latch retraction (MEL) system designed for enhanced security in multifamily and commercial settings. This exit device features a surface vertical rod exit mechanism, paired with a nightlatch pull trim that requires a 1-1/4 mortise cylinder. The unit operates on 24VDC with a 1 Amp current, providing energy-efficient control that minimizes power consumption. Built to Grade 1 standards, the MEL-25V showcases a sleek satin chrome finish (626/US26D), ensuring durability and a professional appearance. Its modular design allows for easy installation on existing Falcon 24 or 25 Series exit devices, streamlining upgrades in your security system. The self-calibrating motor assembly guarantees reliable operation, while built-in diagnostics facilitate troubleshooting. This exit device is compatible with various power supplies, making it versatile for different applications. The MEL option can work seamlessly with credential readers, allowing authorized users to access designated areas efficiently. Additionally, its vandal-resistant design detects and responds to tampering, ensuring that your property remains secure. For a robust and reliable security solution, the Falcon Lock MEL-25V-NL-US26D-36X96 KIT stands out as a top choice for professionals seeking to enhance safety and accessibility.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 36in x 86in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged