Falcon Lock MEL-F25C-DT-US26D-36X96 Motorized Electric Latch Retraction Exit Device, Dummy Pull Trim, Satin Chrome

Falcon Lock MEL-F25C-DT-US26D-36X96 KIT offers advanced motorized electric latch retraction (MEL) technology designed for multifamily and commercial facilities. This fire-rated SVR Surface Vertical Rod Exit Device combines functionality with security, ensuring reliable mechanical egress while providing the convenience of electronic control. With a UL rating and powered by a 24VDC motor drawing just 1 Amp, this Grade 1 device is not only efficient but also compatible with standard Schlage power supplies. The modular design simplifies installation, allowing easy conversion from existing mechanical Falcon 24 or 25 exit devices. On-board diagnostics enhance troubleshooting, while the self-calibrating motor assembly ensures consistent performance. This exit device features vandal resistance, detecting and responding to tampering attempts, making it an ideal choice for high-traffic areas. The push bar is electronically pulled in when dogged, enhancing usability. It can be integrated with credential readers for momentary unlatching or extended periods of free entry, providing flexibility in access control. Available in a sleek satin chrome finish (626/US26D), the Falcon Lock MEL-F25C-DT is engineered for durability and aesthetic appeal. Elevate your security solutions with this cutting-edge exit device that balances safety, convenience, and modern technology.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Dummy Pull Trim 512DT, 36in x 96in, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged