Falcon Lock MEL-F25C-L-NL-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction Exit Device w/ Quantum Lever Trim 510L-NL

Falcon Lock MEL-F25C-L-NL-QUA-US26D-48X96-LHR KIT is a sophisticated motorized electric latch retraction (MEL) system designed for fire-rated concealed vertical rod exit devices. This innovative solution is ideal for multifamily and commercial facilities seeking an energy-efficient and cost-effective electronic control method for exit devices. The device is UL listed and operates on a 24VDC power supply with a low inrush current of just 1 Amp, making it compatible with standard Schlage power supplies. This exit device features easy installation through a modular design, allowing seamless integration with existing Falcon 24 or 25 Series exit devices. With its self-calibrating motor assembly and onboard diagnostics, troubleshooting is simplified, ensuring reliable performance. The MEL system works in conjunction with credential readers to provide authorized access while maintaining mechanical egress capabilities. Constructed from durable materials, the MEL-F25C-L-NL-QUA is vandal-resistant, detecting any tampering or attacks. Its satin chrome finish (626/US26D) adds a touch of sophistication to any entryway, while its reversible design accommodates left-hand reverse applications. This exit device is a perfect blend of security, convenience, and aesthetic appeal, making it an essential choice for modern security solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged