Falcon Lock MEL-F25R-L-DAN-US26D-48-RHR Motorized Electric Latch Retraction Rim Exit Device, 24VDC, Satin Chrome

Falcon Lock MEL-F25R-L-DAN-US26D-48-RHR KIT offers a cutting-edge solution for secure access with its motorized electric latch retraction (MEL) feature. Designed specifically for multifamily and commercial real estate, this fire-rated rim exit device ensures that safety is never compromised. The sleek satin chrome finish (626/US26D) not only adds to its aesthetic appeal but also enhances durability. This exit device operates on a 24VDC power supply, drawing 1 Amp, making it energy-efficient and adaptable to various installations. Its modular design simplifies the installation of the MEL conversion kit onto existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly and built-in installation diagnostics facilitate seamless integration and troubleshooting. Falcon Lock's MEL technology allows for momentary unlatching through credential readers, enhancing access control while maintaining mechanical egress capabilities. Vandal-resistant features ensure that the device can withstand tampering attempts, providing peace of mind. For optimal performance, a power transfer device (EPT, electrified hinge, or door loop) is required, which is sold separately. This exit device is also compatible with various security monitoring options and fail-safe or fail-secure electric trim. With a length of 48 inches and a right-hand reversible configuration, the MEL-F25R is a versatile choice for modern security needs.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged