Falcon Lock MEL-F25R-L-DT-DAN-US26D-48-LHR Motorized Electric Latch Retraction Rim Exit Device, Satin Chrome, 24VDC

Falcon Lock MEL-F25R-L-DT-DAN-US26D-48-LHR KIT features advanced motorized electric latch retraction (MEL), providing a cost-effective electronic control solution for exit devices in multifamily and commercial settings. Designed with functionality and efficiency in mind, this fire-rated rim exit device is UL listed and operates on a 24VDC power supply, drawing only 1 amp. The MEL option allows for seamless integration with credential readers, enabling authorized users to unlatch doors momentarily or maintain extended access. Its energy-efficient design supports longer wire runs and compatibility with standard Schlage power supplies. The modular design simplifies installation, and the on-board diagnostics facilitate troubleshooting. Designed to withstand vandalism, the device detects and responds to tampering, ensuring security in high-traffic areas. The self-calibrating motor assembly enhances reliability, while the electronic dogging feature pulls the push bar in when engaged. This exit device, available in a sleek satin chrome finish (626/US26D), is grade 1 rated for durability and performance. A power transfer device is required for installation and is sold separately. Choose the Falcon Lock MEL-F25R for an innovative solution that combines safety, efficiency, and ease of use.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged