Falcon Lock MEL-F25R-L-QUA-US26D-36-LHR Motorized Electric Latch Exit Device, Fire Rated, Quantum Lever Trim 510L, LHR

Falcon Lock MEL-F25R-L-QUA-US26D-36-LHR KIT offers an advanced solution with its motorized electric latch retraction (MEL), designed for both multifamily and commercial real estate facilities. This fire-rated rim exit device features a sleek Quantum lever trim and is equipped with a 36-inch left-hand reversible configuration, ensuring seamless installation and operation. The UL-listed device operates on 24VDC at 1 Amp, making it energy efficient and compatible with standard Schlage power supplies. One of the standout features of this exit device is the ability to work with credential readers for momentary unlatching, allowing for secure access control without sacrificing convenience. The modular design simplifies installation, and built-in diagnostics help troubleshoot issues effectively. With a self-calibrating motor assembly and vandal-resistant capabilities, the MEL-F25R enhances security while providing reliable mechanical egress. This Grade 1 device is finished in a sophisticated satin chrome, ensuring both durability and aesthetic appeal. For optimal operation, a power transfer (EPT) is required and sold separately, allowing for a clean wiring path from the door to the frame. Upgrade your access control system with the Falcon Lock MEL-F25R-L-QUA-US26D-36-LHR KIT, where efficiency meets security.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged