Falcon Lock MEL-F25V-L-DT-DAN-US26D-36X96-RHR Motorized Electric Latch Retraction Fire Rated SVR Exit Device with Dummy Trim

Falcon Lock MEL-F25V-L-DT-DAN-US26D-36X96-RHR KIT is a sophisticated motorized electric latch retraction (MEL) exit device designed for both multifamily and commercial real estate applications. This fire-rated SVR surface vertical rod exit device offers a seamless integration of electronic control for enhanced security and ease of use. With a Grade 1 rating, it ensures durability and reliability in high-traffic environments. The MEL feature allows for energy-efficient operation, enabling longer wire runs and compatibility with standard Schlage power supplies. It can be easily converted to existing Falcon 24 or 25 Series exit devices, simplifying installation and maintenance. The self-calibrating motor assembly and built-in diagnostics enhance the device's reliability. Vandal-resistant design detects and responds to tampering, ensuring security remains uncompromised. This exit device measures 36 inches by 96 inches and is configured for right-hand reverse/reversible installations. The satin chrome finish (626/US26D) adds an elegant touch, making it suitable for various architectural styles. For added convenience, the MEL can be paired with credential readers, allowing authorized access and momentary unlatching. Ideal for facilities that prioritize safety and accessibility, the Falcon Lock MEL-F25V-L-DT-DAN is a smart choice for modern security solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged