Falcon Lock MEL-F25V-L-DT-DAN-US26D-48X96-LHR Motorized Electric Latch Retraction Exit Device, Satin Chrome, Grade 1, UL

Falcon Lock MEL-F25V-L-DT-DAN-US26D-48X96-LHR KIT offers an advanced solution for secure and efficient access control in multifamily and commercial properties. This motorized electric latch retraction (MEL) device integrates seamlessly with Falcon's 24 and 25 Series exit devices, providing a cost-effective and energy-efficient method for managing door access. The sleek satin chrome finish (626/US26D) complements various architectural styles while ensuring durability. Designed for ease of installation, the MEL conversion kit allows for a straightforward upgrade of existing mechanical exit devices. The device operates at 24VDC with a low inrush current of 1 Amp, making it compatible with standard Schlage power supplies. With features such as self-calibrating motor assembly and built-in troubleshooting diagnostics, maintenance is simplified. This exit device is vandal-resistant, designed to detect and respond to tampering attempts, ensuring enhanced security. The MEL-F25V also enables mechanical egress, providing an essential safety feature. Compatible with credential readers, it allows authorized users to gain access effortlessly, while automatic operators can also be paired for added convenience. Ideal for high-traffic areas, the Falcon Lock MEL-F25V-L-DT-DAN-US26D-48X96-LHR KIT combines security, efficiency, and style in one comprehensive package.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged